1. The whole electrical system is replaced with industrial PLC control and touch screen control, and the performance is better. 2. Mechanical system maintenance of the whole machine to ensure that the accuracy meets the requirements; The lifting and feeding system is upgraded to lead screw guide for more accurate control.
This equipment is a Mayer Berger TS23 refurbished machine
A. Components and performance characteristics
1.1 The whole machine electrical system replacement, the use of industrial PLC control and touch screen control and better performance.
1.2 Mechanical system maintenance of the whole machine to ensure that the accuracy meets the requirements; The lifting and feeding system is upgraded to lead screw guide for more accurate control.
B.Main technical parameters
Project | Parameter | Unit | |
Processing range | X-stroke | 600 | MM |
Z-stroke | 400 | MM | |
Minimum/maximum diameter of the processed product | 1-155 | MM | |
Spindle speed | Spindle speed range (cutter head) | 800-2000 | RPM |
Spindle speed control mode | Frequency changer | --- | |
X-axis minimum/maximum cut | 0.3/10 | M/min | |
X-axis feed mode | Manual and automatic feed | ||
Z-axis minimum/maximum cut | 0.2/8 | M/min | |
Z-axis feed mode | Manual and automatic feed | ||
Automatic slicing | Single/continuous | ||
precision | Air spindle rotation accuracy | 0.005 | MM |
X-axis precision positioning (front and rear of table) | 0.01 | MM | |
Z-axis precision positioning (above and below the table) | ±0.10 | MM | |
X/Y swing Angle accuracy | ±1′ | min | |
Appearance | Sanding and repainting | Customer specified color |